(02) 9759 8833
Makita 18V Brushless 4-Stage Impact Driver 5.0Ah Set (DTD171RT)

    Makita 18V Brushless 4-Stage Impact Driver 5.0Ah Set (DTD171RT)

    $349.00
    Call Us At (02) 9759 8833

    Makita 18V Brushless 4-Stage Impact Driver 5.0Ah Set (DTD171RT)

    Features:

    • Enhanced anvil holder - material change from needle bearing to ball bearing provides more stability when using longer bits
    • Quick switch function - the quick switch button allows the user to rapidly switch between the 4 stage impact selection or 2 pre-set function modes
    • Multi function control panel - control panel displays 4-stage impact selection as well as 4 mode functions. Assist mode, reverse rotation mode and Tek screw mode 1 and 2
    • Brushless motor - powerful and compact the BL44 produces high power in a compact design ideal for rapid stop and start applications normally undertaken by impact drivers
    • Left and right twin LED - twin LED job lights have been repositioned onto the left and right of the housing providing a brighter wider light. The LED light can also manually be turned on and off from the multifunction panel
    • Variable speed trigger - as well as the multi speed control panel the user can optimise the speed of the impact driver via the trigger
    • XPT - eXtreme Protection Technology - enhances dust and drip resistant performance for use in outdoor applications or harsh environments
    Specifications:
    Voltage 18V
    Max capabilities - standard bolt M5-M16
    Max capabilities - high tensile bolt M5-M14
    No Load Speed Max: 0 - 3600 rpm
    Hard: 0 - 3200 rpm
    Med 0 - 2100 rpm
    Soft: 0 - 1100 rpm
    Impact Rate Max: 0 - 3800 ipm
    Hard: 0 - 3600 ipm
    Med 0 - 2600 ipm
    Soft: 0 - 1100 ipm
    Max tightening torque 180 Nm
    Drive shank 6.35 mm (1/4" Hex)
    Overall Length 116 mm
    Tool weight 1.0 kg
    Makita Active 3 Li-Ion Rapid Charger DC18RC

    Features:

    • Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
    • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
    • Forced air cooling fan - cools the battery to minimise charging time
    • Digital power display identifies the condition of the battery and charging condition
    Specifications:
    Cell Capacity 1.5-5.0 Ah
    Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
    Net Weight 820 g
    Overall Length 185 mm
    Voltage 18 V
    Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

    Features:

    • Star Protection
    • Battery Fuel Gauge
    • Multi-contact slide type terminal
    • Protective gel coating
    • Active 3 Controls current, voltage and thermal temperature
    • Shock absorbing construction
    • The fastest charge times in the industry
    • Intelligent battery & charger communication system
    • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
    • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
    • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
    • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
    • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
    • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
    • Up 66% more run time than BL1830*
    • 4-Stage battery fuel indicator
    • 45 minute charge time
    Specifications:
    Voltage 18V
    Dimensions LxWxH 11 x 8 x 6.5 cm
    Weight 0.63 Kg

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP