Metabo 18V 1/2" Impact Wrench 300Nm 4.0Ah LiHD Kit SSW AU60239540

Name: Metabo 18V 1/2" Impact Wrench 300Nm 4.0Ah LiHD Kit SSW AU60239540
Brand: Omer Tools
Price: 629.0 AUD
Availability: OutOfStock

$629.00

Sold out

Features:

Compact cordless impact driver with 1/2" male square and 300 Nm
Unique Metabo brushless motor for quick work progress and highest efficiency for any application
Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent over tightening
High torque machine with low kick-back torque
Twelve speed/torque levels for a wide range of applications
Integrated work light for illumination of the work area
Robust die cast aluminium gear housing for optimum heat dissipation and durability
Handy belt hook, can be fixed either on the right or left side
Battery packs with capacity display for checking the charge status
Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack

Specifications:
Voltage	18 V
Max. no-load speed	0 - 2650 rpm
Maximum impact rate	3750 bpm
Maximum torque	300 Nm
Speed/torque levels	12
Bit retainer	Male square 1/2" (12.70 mm)
Vibration - Impact screwdriving	7 m/s²
Vibration - Uncertainty of measurement K	1.5 m/s²
Noise emission - Sound pressure level	95 dB(A)
Noise emission - Sound power level (LwA)	106 dB(A)
Noise emission - Uncertainty of measurement K	3 dB(A)

Features:

LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
Ultra M technology: Intelligent battery management for long-lasting battery packs
Patented "AIR COOLED" charging technology
Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
Processor-controlled charge and discharge management
Capacity display with almost no self-discharge
One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

Features:

Monitored charging with microcontroller
Battery diagnosis
Charge time approximately 30 minutes at 1.5 Ah
"AIR COOLED" function
For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
"AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.