Compact light-weight with ergonomically designed carry handles, ideal for mobile use
Sliding function for wide work pieces.
For sawing wood, coated panels and slats
Saw head lock and cable winder for safe carrying
Aluminium die-cast parts for low weight, long service life and precision
Fast and precise setting of common angles using stop points
Laser for exact display of the cutting line (mains powered, no batteries required)
Freely adjustable table extension on both sides with a practical support surface and integrated crosscut fence
Integrated work light for illumination of the cutting line (mains powered, no batteries required)
Depth stop for easy creation of grooves
High sliding rear fence profiles for safe sawing
Material clamp for secure fixing of the work piece from the top or front
Easy saw blade change by means of spindle lock: No dismantling of the pendulum protective cover required
Chip collection bag for clean air at the workplace
Specifications:
Dimensions L x W x H: 820 x 543 x 355 mm
Maximum cutting width 90°/45°: 305 mm/205 mm
Maximum cutting depth at 90°/45°: 65 mm/36 mm
Maximum cross-section of the workpiece:
- Straight cut 90°/90°: 305 x 65 mm
- Double mitre 45°/45°: 205 x 36 mm
Turntable setting left/right: 47 °/47 °
Saw blade tilt left/right: 45 °/0 °
Saw blade: 216 x 30 mm
Rated input power: 1,5 kW
Idle revolution: 5.000 /min
Revolutions at rated load: 3.750 /min
Cutting speed: 42 m/s
Weight: 14 kg
Cable length: 2 m
Metabo 18v-7.0Ah LiHD Battery
Features:
LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
Patented "AIR COOLED" charging technology
Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
Processor-controlled charge and discharge management
Capacity display with almost no self-discharge
No memory effect
Capacity display with almost no self-discharge
Specifications:
Battery pack voltage
18 V
Capacity of battery pack
7 Ah
Air cooled
1
Metabo 36V Superfast Charger ASC 30 627047000
Features:
Monitored charging with microcontroller
Battery diagnosis
Charge time approximately 30 minutes at 1.5 Ah
"AIR COOLED" function
For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
"AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
